Coffee drying machine
drying machine,dryer machine,drying machinery
There are several coffee drying machine systems available. Many older drying machines are converted grain drying machines that are not as efficient as the new horizontal barrel drying machines. The new coffee drying machines are designed to mix the coffee evenly to ensure uniform drying. Drying coffee by using mechanical drying machines accelerates the slowest part of the coffee drying process (15-11%) and helps prevent fermentation. In some environments that have a high humidity the entire drying process must take place in mechanical drying machines. Mechanical drying machines should never be set higher than 40-45°C and this question should be asked before buying any coffees that have been mechanically dried. At higher temperatures the germ is killed and the flavor potential of the coffee is ruined. At extreme temperatures the bean crystallizes, and when smashed with a hammer, will break like glass.
The best, but least utilized method of drying coffee is by using drying tables. In this method the pulped and fermented coffee is spread thinly on raised beds, which allows the air to pass on all sides of the coffee. The coffee is mixed by hand and the drying that takes place is more uniform and fermentation is less likely. Most coffee from Africa is dried in this manner and select coffee farms around the world are following their lead.
Technical parameters
|
|
LPG-5 | LPG-25 | LPG-50 | LPG-100 | LPG-150 | LPG-200 | LPG-500 | LPG-800 | LPG-1000 | LPG-2000 | LPG-3000 | LPG-4500 | LPG-6500 |
| Inlet temperature C | 140-350 automatically controlled | ||||||||||||
| Outlet teperature C | 80-90 | ||||||||||||
| Centritugal spraying nonzzle | High Speed centrifugal atomizer | ||||||||||||
| Centritugal spraying nonzzle (KG/H) | 5 | 25 | 50 | 100 | 150 | 200 | 500 | 800 | 1000 | 200 | 3000 | 4500 | 6500 |
| Rotation speed(r.p.m) | 25000 | 22000 | 21500 | 18000 | 16000 | 12000-13000 | 11000-12000 | ||||||
| Spraying disc diameter(mm) | 60 | 120 | 150 | 180-210 |
Decided in accordance with the requirements of process |
||||||||
| Max,Electric heating power(kw) | 8 | 31.5 | 120 | 81 | 99 | ||||||||
| Dride powder restoring rate () | ≥95 | ||||||||||||
| Length of convered area (m) | 1.6 | 4 | 4.5 | 5.2 | 7 | 7.5 | 12.5 | 13.5 | 14.5 | ||||
| Width of convered area (m) | 1.1 | 2.7 | 2.8 | 3.5 | 5.5 | 6 | 8 | 12 | 14 |
Depends on working process, manufacturing conditions and customers requirements to design. |
|||
| heigth of tower body (m) | 1.75 | 4.5 | 5.5 | 6.7 | 7.2 | 8 | 10 | 11 | 15 | ||||
| hoisting heighr of nozzle (m) | -- | 2.5 | 2.5 | 3.2 | 3.2 | 3.2 | 3.2 | 3.2 | 3.2 | ||||
